Enhanced range of precision supper abrasives grinding, dressing and polishing wheels
The demands for high performance on carbide & HSS round tool grinding requires unique design that match optimized bond Wear-Behavior and special abrasives Diamond and CBN grain.
A ONE INDUSTRIAL wheels have proven bond and grain systems effectiveness behavior, characterized by Lower power consumption and Higher Feed rates at low spindle loads, Leads to wide range of process-optimization.
Our bond system matrixes extends grinding efficiency by shorter cycle times and long wheel service lives, guarantees consistency of grinding quality throughout the wheel life.
Typical Wheel Shapes
Enhanced Diversity of Diamond & CBN wheels for Grinding Operations Wet & Dry Reriaty
1A1
Variety of wheels diameter (D) from 2″ to 12″,
bond Width (T/U) from 1/4″ to 25/32″,
in typical bond height (X) of 1/4″ and 3/8″
Available in all Diamond & Cubic Boron Nitride(C.B.N) grits sizes and concentrations to fit your applications
3A1
Variety of wheels diameter (D) from 2″ to 12″,
bond Width (T/U) from 1/4″ to 25/32″,
in typical bond height (X) of 1/4″ and 3/8″
Available in all Diamond & Cubic Boron Nitride(C.B.N) grits sizes and concentrations to fit your applications
14A1
Variety of wheels diameter (D) from 2″ to 12″,
bond Width (T/U) from 1/4″ to 25/32″,
in typical bond height (X) of 1/4″ and 3/8″
Available in all Diamond & Cubic Boron Nitride(C.B.N) grits sizes and concentrations to fit your applications
1V1
Verity of wheels diameter (D) from 2″ to 12″,
bond Width (T/U) from 1/4″ to 25/32″,
in typical bond height (X) of 1/4″ and 3/8″
Available in all Diamond & Cubic Boron Nitride(C.B.N) grits sizes and concentrations to fit your applications
3V1
Variety of wheels diameter (D) from 2″ to 12″,
bond Width (T/U) from 1/4″ to 25/32″,
in typical bond height (X) of 1/4″ and 3/8″
Available in all Diamond & Cubic Boron Nitride(C.B.N) grits sizes and concentrations to fit your applications
14V1
Variety of wheels diameter (D) from 2″ to 12″,
bond Width (T/U) from 1/4″ to 25/32″,
in typical bond height (X) of 1/4″ and 3/8″
Available in all Diamond & Cubic Boron Nitride(C.B.N) grits sizes and concentrations to fit your applications
12V9/45*
Variety of wheels diameter (D) from 2″ to 5″,
bond Width (W) 5/64″ & 1/8″,
in typical bond height (X) of 1/4″ and 3/8″
Available in all Diamond & Cubic Boron Nitride(C.B.N) grits sizes and concentrations to fit your applications
11V9/70*
Variety of wheels diameter (D) from 2″ to 5″,
bond Width (W) 5/64″ & 1/8″,
in typical bond height (X) of 1/4″ and 3/8″
Available in all Diamond & Cubic Boron Nitride(C.B.N) grits sizes and concentrations to fit your applications
11V5/20*
Variety of wheels diameter (D) from 2″ to 5″,
bond Width (W) 5/64″ & 1/8″,
in typical bond height (X) of 1/4″ and 3/8″
Available in all Diamond & Cubic Boron Nitride(C.B.N) grits sizes and concentrations to fit your applications
Enhanced Diversity of Diamond & CBN wheels for all Grinding Applications
Variety of wheels diameter (D) from 2″ to 12″,
bond Width (W) 5/64″ & 1/8″,
in typical bond height (X) of 1/4″ and 3/8″
Available in all Diamond & Cubic Boron Nitride(C.B.N) grits sizes and concentrations to fit your applications
Enhanced Diversity of Dresser & Profileing wheels
Point Dressers
Variety of Point Dressers and Holders
Single or Multiple Point Dressers are available in 1 to 5 Layers of diamond, to dress Grinding Wheels up to 9″(250mm) Special Diamond selection is been used with different Diamond weight to enable dressing of fine to coarse wheel’s grits.
Dressing Plates
Variety of Dresser Plates and Holders for CNC machines.
Our dressers provides
- Consistence Dressing Results
- High Heat Resistance
- Long Dresser tool life
- Special Diamond selections and Weights.
diamond roller dressers
Variety of Roller Dressers and Holders for CNC machines.
Our dressers provides
- Consistence Dressing Results
- High Heat Resistance
- Long Dresser tool life
- Special Diamond selections and Weights.
Diamond Profile rolls
Diamond Profile Rolls are available either in Positive (Direct) or Negative (Reverse) Plating Technology with Variety of Grits Sizes, Shapes and very high Tolerances.
Diamond Form rolls
Form rolls are available with either an electroplated or infiltrated bond.
Form Rolls could be use for dressing vitrified bonded diamond, CBN or sintered corundum grinding tools. Form Rolls are not restricted to a specific workpiece therefor they provides high dressing flexibly.
Diversity of CutOff wheels
1A1R
Verity of Special Resin Bonded Diamond & CBN CutOff/Saw Blades with continuous rim in diameter (D) from 2″ to 13″, and Thicknesses”=T up to 5/64
Applicable to cut
- Diamond Wheels:thinwalled glass, tungsten carbide, graphite, ceramic
- Boron nitride(CBN): high-alloy steels, high-speed steels
Available in all Diamond & Cubic Boron Nitride(C.B.N) grits sizes and concentrations to fit your applications
1A1R/S
Verity of Special Resin Bonded Diamond & CBN Cut Continuous rim with Side Slots Off/Saw Blades in diameter (D) from 2″ to 12″, and Thicknesses”=T up to 5/64
Applicable to cut
- Diamond Wheels:thinwalled glass, tungsten carbide, graphite, ceramic
- Boron nitride(CBN): high-alloy steels, high-speed steels
Available in all Diamond & Cubic Boron Nitride(C.B.N) grits sizes and concentrations to fit your applications
1A1R/SS
Verity of Special Diamond Saw Blades/CutOff wheels with Segmented Rim in diameter (D) from 9″ to 55″, and Thicknesses”=T up to 3/16″
Applicable to cut:
Optical, lead crystal glass, thin walled tubes of quartz glass, vycor glass, ceramic, semiconductor materials
Available in variety of Diamond grits sizes and concentrations to fit your applications